The fast and maneuverable Cross-Cross-Hardtail Team Marin, from the experienced California brand Marin Bikes, will give incredible satisfaction to its owner from the feeling of perfect control over the fable at high speed, allowing the rider to pump skills and put new records. The bicycle frame is made of corporate, the lightest of all modifications, aluminum alloy Series 4 and is equipped with strong dropautami made by the 3D forging method. The steering pipe has a conical shape that helps to withstand severe strokes and not break with landing or rapid ride on trails with complex relief. The pipes from which the frame is made is used double batting - the thickness of the walls changes twice. This made it possible to lose weight, making the walls as thin as possible in places that do not feel overload, but leaving the thickness unchanged at key points. This made it great to reduce the weight of the frame, leaving the strength of the structure at a high level. To achieve the best dynamic characteristics of acceleration and ride uphill, as well as better control over the fable, the pen was shortened to 425 mm. But The highest increase in control control, especially on technical routes with a sharp change in relief, gives a littered angle of the steering 67 degrees, almost like track bicycles, a larger wheelbase than classic Kanthnikov, and a very wide steering wheel 780 mm. The low and long front triangle, along with the right angle of the seat pipe, allow the rider to easily find a balance over the fable, which would be as effective as possible, both sitting in the saddle and standing on the pedal. The high carriage and rods with one star significantly improve the patency of the bicycle. The frame involves the internal wiring of the Dropper. The cables and hydraulic are also hidden inside the frame, which would reduce the likelihood of their damage and facilitate cleaning the fable after riding in rainy weather. In addition, it makes the appearance much more attractive, especially in combination with a minimalist bicycle design. The rockshox Judy Silver Tk Air-Mass Fork is equipped with a cross-cutting axis of Boost 15x110 mm, blockage, to reduce rocking on a flat surface and when riding uphill, as well as Turnkey technology, which will allow The forks work and smooth the inequality even in a locked state. The course of the 120 mm fork is perfectly "eating" large potholes and blows that the Ryder would not lose control on the areas of the route with large stones and roots. The bike is rolled on wheels with a very popular 29 ", which gives the best rolling of all modern sizes in Mountinbinging, and they are more stable and comfortable for small irregularities, unlike no less popular wheels 27.5". The rims of the wheels are made of double -walled profile, which at the junction is reinforced by pins. Forged aluminum bushings are made by Boost standard, with increased width, for greater rigidity of the wheels. Connected bushings with rims of 32 stainless steel spokes. Wheels, as well as tires, support tareless use. VEE TIRE RAIL ROCCO tire tread perfectly combines a good clutch and a rapid off -road acceleration. Width 2.3 "well absorbs shaking from small irregularities, and additionally improves clutch due to a greater stain contact with the roadbone. The braking is corresponding 180 mm in the back and front. They have good modulation and power, but for heavy rideri they may not fit with an aggressive driving style. The Shimano Deore 6100 transmission at 12 speeds, with a cassette for 10-51 teeth, will allow you to quickly rush, both in the plain and on steep hills, very accurately selecting the necessary transmission. The rear switch has a special mechanism, when the paw becomes more rigid, reducing the swinging of the chain and reducing the likelihood of its fall when driving on stones and roots. Team Marin is the fastest and most technological racing aluminum hardeel from the Californians with Marin Bikes. It will be suitable for advanced fans of high-road races, both for training and fan trips, and for participation in amateur marathons and races in the discipline of the cross-catra.
| Rear switch |
Shimano Deore M6100, 12 speeds |
| Frame |
Aluminum series 4 6061, post-montage, internal wiring, axis 148x12 mm |
| Fork |
Rockshox Judy Silver Tk, Move 120 mm, solo air, aluminum conical rod, Axis maxle stealth 110x15mm, displacement 51 mm |
| Chain |
KMC X12 |
| Height |
160-168 cm |
| Tires |
VEE TIRE RAIL ROCCO XC, 29X2.3 ", double control connection, irrevocable use |
| Cassette |
Shimano Deore M6100, 12 speeds, 10-51t |
| Brake handles |
Shimano BL-MT201, hydraulic |
| front brake |
Shimano Br-MT201 disk, hydraulic, 180 mm rotor |
| Rear brake |
Shimano Br-MT201/ UR300, Disk, Hydraulic, Post-Monitor, Rottor 180 mm |
| Steering wheel |
Marin Mini-Riser, aluminum 6061, double batting, width 780 mm, up 4º, back 9º |
| Saddle |
The concept of high -speed marin concept |
| Bicycle category |
Mountains |
| Bicycle color |
Silver |
| Brake type |
Disk of hydraulics |
| Connecting rod |
Marin, forged aluminum, 1x12, hollow axle, steel star 32 tonnes narrow |
| Datrol pin |
Aluminum Marin, 30.9 mm |
| Enterprises |
To: Aluminum, 110x15 mm, central block, 32h / ass: Shimano, 148x12MM, Microspline, Centerlock, 32h |
| Floor |
Man, unisex |
| Frame size |
S |
| Framework |
Aluminum |
| Gabarita goods |
Yes |
| Greek |
Marin with one castle |
| Knitting a needle |
Stainless steel, 14 g |
| Method of transmission |
Mechanical |
| Pedal |
Nylon platform |
| Pendant |
Hard time |
| Pruning |
Aluminium Marin, double, inner width 29 mm, pin, support free use |
| Removal |
Marin 3D made aluminum, 35 mm |
| Review |
Bicycle |
| Swarf |
732415002 |
| Switching handles |
Shimano Deore M6100 12-Congry |
| The diameter of the wheels |
29 ” |
| The series model |
Marina Marin team |
| The steering column |
FSA № 42ACB, 1 1/8 "X 1 1/2" |
| Type of fork |
Air oil |
| Type of mountain bike |
Cross |
| Year |
2023 |